| Physical Condition |
| Construction: |
Polycarbonate radome enclosure and die-cast-shell at the bottom |
| Dimension: |
58 mm(L)x 48 mm(W)x 15 mm(H) |
| Weight: |
63 grams (excluding cable & connector) |
| Standard Mounting: |
2 magnetic mounts, screw mount with 2 M3 tapped holes on the base. |
|
Optional Mounting Plate:
|
Metal flanges with holes for permanent mount. |
| Cable & Connector |
| RF Cable: |
5 meters RG174/U (standard) cable & length (optional) |
| Pulling Strength: |
6 Kg @ 5 sec. |
| Connector Available: |
BNC, TNC, FME, MMCX, MCX, SMA, SMB or SMC. Straight or right angle. |
| Optional Adapters: |
Universal Connector Adapter (FME to TNC/BNC/SMA/SMB/MCX) |
| Antenna Element |
| Polarization: |
R.H.C.P. (Right Hand Circular Polarization) |
| Gain at Zenith: |
+1.5 dBic typical |
| Mounted on the 70mm x 70mm square ground plane |
| Axial Ratio: |
3 dB max. |
| Mounted on the 70mm x 70mm square ground plane |
| Low Noise Amplifier |
| Gain: |
27 dB @ 3V typically |
| Band Width: |
43 MHz min. @ ?-10 dB |
| Noise Figure: |
1.5 Typical. |
| Supply Voltage: |
2.5~5V DC |
| Current Consumption: |
3V DC : 10.6 mA Typical 5.0V DC : 21 mA Typical |
| OVERALL PERFORMANCE (Antenna Element, LNA & Cable) |
| Center Frequency: |
1575.42 MHz ± 10 MHz & 1602 MHz ± 8 MHz |
| Gain: |
At 90o 27 + 3dB (Cable loss) note:1. Mounted on the 70mm x 70mm square ground plane |
| VSWR: |
2.0 max. |
| Output Impedance: |
50 ohm |
| Environmental conditions |
| Operating Temperature: |
-40oC~+85oC |
| Storage Temperature: |
-40oC~+90oC |
| Relative Humidity: |
95% non-condensing |
